Hi,

Its possible to convert in script two bytes hexadecimal to one decimal value?

OK, so I have to define all commendsd in driver tree?

How can I read and send volume level and convert to eg. 0-100% if:

"Ashly encodes level as a 16-bit (two byte) value. This value's range is from -50.0dB to +12.0dB with tenth-dB
precision. The process for converting a value in dB to the encoded form is to take the dB value, multiply by 10,
and add 8192. For example, the encoded form of -6.3dB would be -6.3dB * 10 + 8192 = 8129. You can then
take that encoded value and convert it to the two bytes by converting to hexadecimal (0x1FC1). So the first
byte is 0x1F and the second byte is 0xC1."

It's works. Thanks for help

second screen, after:
1. quit Studio
2. disconnect external screens
3. run Studio - ca't found overview, project device panel and device base

edit:

use Windows 10 pro 64bit. On older versions of Studio have these same problem.

v1.3.8.20500

First screen when use external monitors: